Husqvarna Banner Line Blue 200B Diamond Blades - 542751031
Features
- For general purpose soft to medium-hard aggregate with light steel reinforcing
- Design of the segment provides a reduced contact surface in the concrete
- Gives a quick start in a controlled manner, when applying a new blade
- Total segment height is .390" (.315" diamond depth; .075" segment base)
- 26" and larger blades have wide notch segments
- For wet cutting only
What our Experts Think
-
Constant water supply without extras
Provides a steady pressurized water flow (≈0.5–0.7 bar / 7–10 psi) ideal for concrete cutting, core drilling, and grinding, without needing a pump, battery, electronics or manual pumping.
-
Portable & jobsite‑ready
Compact 14 L capacity with a 3 m reinforced hose and lightweight design (~6 kg dry) makes it easy to carry, set up and reposition — perfect where mains water access is limited.
-
Reliable dust suppression & tool cooling
Steady water supply helps cool diamond blades/bits and suppress harmful silica dust, improving cut quality, prolonging tooling life, and enhancing operator safety.
-
Simple, low‑maintenance solution
No pumps, batteries or electronics means higher reliability with fewer breakdowns and minimal maintenance — ideal for frequent use or remote sites.
-
Versatile compatibility
Works with a wide range of Husqvarna cutters and core drills (disc saws, handheld drills and drill rigs), giving professionals flexibility on mixed jobs.
Q&A
Q: What is the Husqvarna WT2GO Pressurized Water Tank?
A: A compact, portable constant‑pressure water tank designed to supply water for wet cutting, core drilling, and concrete grinding without needing a pump, battery, or electronics.
Q: What are the key specs of model 598742401?
A: It holds ~14 L (≈3.7 gal) of water, delivers ~7–10 psi constant pressure, includes a 3 m reinforced hose and nozzle, and weighs about 6 kg (empty) — making it easy to carry and operate on jobsites.
Q: Why use WT2GO on job sites?
A: It provides a steady water flow for dust suppression and blade cooling during concrete cutting, drilling, and grinding — especially where direct water access or hoses are impractical.
Q: How does it work without a pump?
A: The tank uses a constant‑pressure design with internal chambers, supplying reliable water flow without pumps, batteries, or electronics for simpler operation and fewer failure points.
Q: What tools does it fit?
A: Compatible with many Husqvarna tools including power cutters and core drills for effective wet cutting and dust control.
Q: How does WT2GO benefit operators?
A: Lightweight and portable, it lets operators work in areas without onsite water supply and improves dust suppression compliance on construction and renovation jobs.
Maintenance Tips
-
Clean hose & fittings before use — flush any debris to maintain smooth water flow.
-
Check all connections and seals before each job to avoid leaks.
-
Use only clean water; avoid soaps, chemicals, or additives inside the tank.
-
Avoid over‑pressurizing when filling (don’t exceed max rated pressure).
-
Depressurize before storage or maintenance to protect seals and valves.
-
Empty and rinse the tank after use, especially if left full for long periods.
-
Inspect the hose regularly for cracks or wear; replace if damaged.
-
Store dry and protected from extreme temperatures and direct sunlight.
-
Do not attempt internal repairs; contact an authorized technician for service.
-
Use genuine replacement parts to maintain performance and safety.
